Pass4Test Dell DC0-261 Prüfung Übungen und Antworten

Jeder hat seinen eigenen Lebensplan. Wenn Sie andere Wahlen treffen, bekommen sicher etwas anderes. So ist die Wahl serh wichtig. Die Schulungsunterlagen zur Dell DC0-261 Zertifizierungsprüfung von Pass4Test ist eine beste Methode, die den IT-Fachleuen hilft, ihr Ziel zu erreichen. Sie enthalten Prüfungsfragen und Antworten. Und sie sind den echten Prüfungen ähnlich. Es ist wirklich die besten Schulungsunterlagen.

Pass4Test ist eine Website, die Schulungsunterlagen zur IT-Zertifizierungsprüfung bietet. Seine Erfolgsquote beträgt 100%. Das ist der Grund dafür, warum viele Kandiadaten Pass4Test glauben. Pass4Test kümmert sich immer um die Bedürfnisse der Kandidaten unf versuchen, ihre Bedürfnisse abzudecken. Mit Pass4Test werden Sie sicher eine glänzende Zukunft haben.

Pass4Test wird nicht nur Ihren Traum erfüllen, sondern Ihnen einen einjährigen kostenlosen Update-Service und Kundendienst bieten. Die Prüfungsfragen von Pass4Test sind alle richtig, die Ihnen beim Bestehen der Dell DC0-261 Zertifizierungsprüfung helfen. Im Pass4Test können Sie kostenlos einen Teil der Fragen und Antworten zur Dell DC0-261 Zertifizierungsprüfung als Probe herunterladen.

Um keine Reue und Bedauern in Ihrem Leben zu hinterlassen, sollen Sie jede Gelegenheit ergreifen, um das Leben zu vebessern. Haben Sie das gemacht?Die Schulungsunterlagen zur Dell DC0-261 Zertifizierungsprüfung von Pass4Test helfen den IT-Fachleuten, die Erfolg erzielen wollen, die Dell DC0-261 Zertifizierungsprüfung zu bestehen. Um den Erfolg nicht zu verpassen, machen Sie doch schnell.

Exam Code: DC0-261

Prüfungsname: Dell (Dell Storage Networking Professional Exam - Version 2)

DC0-261 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/DC0-261.html

NO.1 Which four LUN characteristics can be displayed in Navisphere Analyzer? (Choose four.)
A. Bytes Tx / Rx
B. Utilization (%)
C. Capacity (GB)
D. Response Time (ms)
E. Total Bandwidth (MB/sec.)
F. Total Throughput (I/O /sec.)
Answer: BDEF

Dell echte fragen   DC0-261   DC0-261

NO.2 What steps should you perform to create a copy of a source LUN in a second storage array, while
minimizing unavailability of the source LUN?
A. use SAN Copy to copy the source LUN, then take a snapshot on the second storage array
B. take a snapshot of the source LUN, then use SAN Copy to copy the snapshot to the second storage
array
C. take a snapshot of the source LUN, then use SAN Copy to copy the source LUN to the second storage
array
D. take a snapshot of the source LUN, run MirrorView to mirror the snapshot to the second array, then
use SAN Copy to synchronize the mirror with the source LUN
Answer: B

Dell prüfungsfragen   DC0-261   DC0-261 exam fragen   DC0-261 zertifizierungsfragen   DC0-261 zertifizierung

NO.3 Which two states can a clone LUN be in before it can be fractured? (Choose two.)
A. consistent
B. synchronizing
C. synchronized
D. reverse out-of-sync
Answer: AC

Dell echte fragen   DC0-261   DC0-261 antworten

NO.4 How many LUNs are required for the Clone Private LUN?
A. one per SP
B. one per clone
C. one per clone group
D. one per storage system
Answer: A

Dell prüfungsfragen   DC0-261   DC0-261 exam fragen

NO.5 You want to implement site level disaster recovery. Which two are valid options to consider? (Choose
two.)
A. Use SAN Copy to copy LUNs from the primary site to the recovery site.
B. Use SAN Copy to mirror a LUN from the primary site to the recovery site.
C. Use MirrorView to mirror LUNs from the primary site to another local array.
D. Use SnapView to create a clone, then use SAN Copy to copy the clone to the recovery site.
Answer: AD

Dell echte fragen   DC0-261 prüfungsunterlagen   DC0-261

NO.6 You are connecting a CX700 to a CX500 through a fabric for Mirrorview. Which two zones must be
completed? (Choose two.)
A. Port 1 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
B. Port 1 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
C. Port 3 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
D. Port 3 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
Answer: CD

Dell antworten   DC0-261   DC0-261   DC0-261 exam fragen   DC0-261 echte fragen

NO.7 You want User1 to have Administrator access to storage system A that is located in a branch office.
However, you want User1 to have read-only access to the remaining storage systems within the domain.
Which scenario best accomplishes this task?
A. User accounts must be either global or local because the user inherits the most restrictive role
assigned to the user.
B. Create a local account with Administrator access on storage system A, then create a global account for
User1 with Monitor access.
C. Create a global account with Monitor access on storage system A, then modify the account policy to
allow User1 to administer only storage system A.
D. Create a global account with Monitor access on the master node, then have User1 log in to storage
system A using the local default manager account.
Answer: B

Dell   DC0-261 zertifizierungsfragen   DC0-261   DC0-261

NO.8 You have a source LUN on a CX500 for which you maintain snapshots for tape backup. You need to
create a new snapshot for this source LUN but are unable to do so. You can create snapshots of other
source LUNs on the array. What is the most likely problem?
A. You have reached the maximum limit of 50 Cache LUNs.
B. You have reached the maximum limit of 8 snapshots per source LUN.
C. You have reached the maximum limit of 150 snapshots per storage system.
D. You have reached the maximum limit of 300 snapshots per storage system.
Answer: B

Dell   DC0-261 echte fragen   DC0-261

NO.9 You have installed SAN Copy. Which statement is true?
A. The storage array must be rebooted.
B. SAN Copy cannot be upgraded, except by a complete re-install.
C. Any LUN within the SAN is automatically made available to be copied.
D. The admhost utility must be installed on each storage array that Navisphere Manager resides on.
E. SAN Copy sessions can be managed through the Navisphere Manager Enterprise Storage window.
Answer: E

Dell   DC0-261   DC0-261   DC0-261 prüfungsunterlagen   DC0-261

NO.10 Which three statements are correct about using SnapView? (Choose three.)
A. Snapshots can take mere seconds to create.
B. Snapshots may be created using the admhost CLI utility.
C. SnapView can take snapshots, or point-in-time copies of LUNs.
D. SnapView can make clones, or 100% duplicate copies of a LUN.
E. Snapshots are volume-level and thus able to restore specific files.
Answer: ACD

Dell prüfung   DC0-261 exam fragen   DC0-261   DC0-261

NO.11 You are concerned that the loss of an SP might cause you to lose all of your existing snapshot
sessions. What should you do to prevent losing existing snapshot sessions?
A. add a UPS to the storage array
B. use PowerPath to gain failover support
C. select the Persistent mode when starting a snapshot session
D. Nothing, the Vaulting process automatically saves all snapshots to disk in the PSM LUN.
Answer: C

Dell prüfung   DC0-261   DC0-261   DC0-261   DC0-261

NO.12 Which two tasks can Navisphere Analyzer perform? (Choose two.)
A. comparing archived and real-time performance data
B. tracking performance trends for Dell / EMC switches
C. tracking performance trends for Dell / EMC storage arrays
D. tracking performance trends for hosts connected to Dell / EMC Storage Area Networks (SANs)
Answer: AC

Dell   DC0-261   DC0-261

NO.13 SAN Copy sessions offer which three capabilities? (Choose three.)
A. providing content push or pull capability
B. offloading Storage Array processing onto hosts
C. migrating data from older arrays to newer arrays in the same SAN fabric
D. distributing and collecting content between the central location and branch offices
Answer: ACD

Dell   DC0-261 antworten   DC0-261   DC0-261 zertifizierung   DC0-261

NO.14 Which three statements are correct about SAN Copy? (Choose three.)
A. SAN Copy can be installed on any model CX array.
B. SAN Copy is a storage array-based Data Mover application.
C. SAN Copy transfers data over a Fibre Channel SAN, as opposed to an IP LAN.
D. SAN Copy sessions can be managed either by Navisphere Manager or by CLI.
Answer: BCD

Dell exam fragen   DC0-261 zertifizierungsantworten   DC0-261 prüfung

NO.15 How are the LUNs for the Write Intent Log (WIL) configured?
A. WIL LUNs are configured automatically.
B. After manually binding the LUNs, the WIL is automatically configured.
C. WIL LUNs must be manually bound and allocated on a per-array basis.
D. WIL LUNs must be manually bound and allocated on one array. The WIL is then automatically
replicated to the other array.
Answer: C

Dell   DC0-261 prüfungsfragen   DC0-261   DC0-261 prüfung   DC0-261

NO.16 Which three statements are correct about clones? (Choose three.)
A. Clones can be copied using SAN Copy to a remote storage array.
B. Clones typically consume about 20% of the size of the source LUN.
C. Fractured clones can later be synchronized with the source LUN to update the contents.
D. Clones can be fractured from the source LUN, then mounted to a secondary host and accessed just
like another LUN.
Answer: ACD

Dell   DC0-261   DC0-261

NO.17 Which statement best describes bi-directional mirroring as implemented by MirrorView ?
A. By utilizing two storage systems, a single storage system can be configured as the primary for one
mirror and a secondary for another mirror.
B. By utilizing two storage systems and one tape drive, the two storage systems are configured as a
primary and the secondary is backed up to tape.
C. By utilizing two storage systems, a single storage system is configured as the primary and the other
storage system is configured as the secondary.
D. By utilizing three storage systems, the two storage systems are configured as a primary and the third
storage system is configured as a secondary that is used to store the primary images.
Answer: A

Dell   DC0-261   DC0-261

NO.18 Which three operations are possible using clones? (Choose three.)
A. Up to eight clones can be made from a single source LUN.
B. While a clone is fractured, it can be connected to a host for use.
C. A fractured clone can be accessed for read and write operations.
D. A snapshot of a clone must be reverse synchronized prior to mounting.
E. A live clone can be mounted by a secondary host to use as a standard LUN.
Answer: ABC

Dell prüfung   DC0-261   DC0-261 prüfungsfrage   DC0-261

NO.19 Which two are examples of how SnapView can be used in conjunction with MirrorView? (Choose two.)
A. SnapView can be used to take a snapshot of the remote mirror for use at the remote site.
B. SnapView can be used to take a snapshot of the remote mirror and then back up the snapshot to tape.
C. SnapView can be used to take a snapshot of the primary mirror and then mirror the snapshot to the
remote site.
D. SnapView can be used to take a snapshot of the remote mirror and then clone the snapshot for use at
the primary site.
Answer: AB

Dell echte fragen   DC0-261 exam fragen   DC0-261 testantworten

NO.20 Which utility should you use to add LUN management functionality to a server when using SAN Copy?
A. naviadm
B. admhost
C. admcopy
D. admsnap
Answer: B

Dell   DC0-261   DC0-261   DC0-261   DC0-261 zertifizierungsfragen

Um die Bedürfnisse von den meisten IT-Fachleuten abzudecken, haben das Expertenteam die Prüfungsthemen in den letzten Jahren studiert. So kommen die zielgerichteten Fragen und Antworten zur Dell DC0-261 Zertifizierungsprüfung auf. Die Ähnlichkeit unserer Fragen und Antworten mit den echten Prüfung beträgt 95%. Pass4Test wird Ihnen helfen, die Prüfung 100% zu bestehen. Sonst erstatteten wir Ihnen die gesammte Summe zurück. Sie können im Internet teilweise die Prüfungsfragen und Anworten zur Dell DC0-261 Zertifizierungsprüfung kostenlos als Probe herunterladen, so dass Sie die Zuverlässigkeit unserer Produkte testen können. Schicken Sie doch die Produkte von Pass4Test in den Warenkorb. Pass4Test wird Ihren Traum erfüllen.