Pass4Test hat riesiege Expertenteam, die Ihnen gültige Schulungsressourcen bieten. Sie haben die Prüfungen in den letzten Jahren nach ihren Erfahrungen und Kenntnissen untersucht. Und endlich kommen die zielgerichteten Fragen und Antworten auf, die den IT-Kandidaten große Hilfe bieten. Nun können Sie im Internet teilweise die Prüfungsfragen und Anworten zur Network Appliance NS0-163 Zertifizierungsprüfung kostenlos als Probe herunterladen. Viele IT-Fachleute haben bewiesen, dass Pass4Test sehr zuverlässig ist. Wenn Sie die zielgerichteten Prüfungsfragen von Pass4Test benutzt haben, können Sie normalerweise die Network Appliance NS0-163 Zertifizierungsprüfung bestehen. Schicken Sie doch die Produkte von Pass4Test in den Warenkorb. Sie werden sehr wahrscheinlich der nächste erfolgreiche IT-Fachmann.
Wenn Sie die Produkte von Pass4Test benutzen, haben Sie den ersten Fuß auf die Spitze der IT-Branche gesetzt und Ihrem Traum nähern. Die Fragen von Pass4Test kann Ihnen nicht nur helfen, die Network Appliance NS0-163 Zertifizierungsprüfung zu bestehen und Ihre Fachkenntnisse zu konsolidieren. Außerdem bieten wir Ihnen auch einen einjährigen kostenlosen Update-Service.
Exam Code: NS0-163
Prüfungsname: Network Appliance Data Protection Solutions
Aktulisiert: 2013-09-18
Nummer: 154 Q&As
Die Kandidaten können die Schulungsunterlagen zur Network Appliance NS0-163 Zertifizierungsprüfung von Pass4Test in einer Simulationsumgebung lernen. Sie können die Prüfungssorte und die Testzeit kontrollieren. In Pass4Test können Sie sich ohne Druck und Stress gut auf die Prüfung vorbereiten. Zugleich können Sie auch einige häufige Fehler vermeiden. So werden Sie mehr Selbstbewusstsein in der Prüfung haben. Im realen Test können Sie Ihre Erfahrungen wiederholen, um Erfolg in der Prüfung zu erzielen.
Es ist nicht so einfach, die NS0-163-Prüfung zu bestehen. NS0-163-Prüfung erfordert ein hohes Maß an Fachwissen der IT. Wenn es Ihnen dieses Wissen fehlt, kann Pass4Test Ihnen die Kenntnissequellen zur Verfügung stehen. Mit ihren reichen Fachkenntnissen und Erfahrungen bietet der Expertenteam die relevanten Fragen und Antworten der NS0-163 Zertifizierungsprüfung. Wenn Sie Pass4Test wählen, versprechen wir Ihnen nicht nur eine 100%-Pass-Garantie, sondern steht Ihnen auch einen einjährigen kostenlosen Update-Service zur verfügung. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück.
NS0-163 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/NS0-163.html
NO.1 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance prüfungsfragen NS0-163 antworten NS0-163 zertifizierung NS0-163 NS0-163
NO.2 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
Network Appliance echte fragen NS0-163 NS0-163
NO.3 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance NS0-163 prüfungsunterlagen NS0-163 NS0-163
NO.4 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance originale fragen NS0-163 exam fragen NS0-163 NS0-163 zertifizierungsfragen
NO.5 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance NS0-163 NS0-163 exam fragen NS0-163 NS0-163
NO.6 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance NS0-163 NS0-163 NS0-163 NS0-163
NO.7 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance zertifizierungsfragen NS0-163 antworten NS0-163 testantworten NS0-163 NS0-163
NO.8 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
Network Appliance NS0-163 NS0-163 prüfungsfrage NS0-163
NO.9 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
Network Appliance prüfungsfragen NS0-163 NS0-163 NS0-163
NO.10 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance NS0-163 NS0-163 prüfungsunterlagen
NO.11 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
Network Appliance antworten NS0-163 prüfungsfrage NS0-163 NS0-163 NS0-163 zertifizierungsantworten
NO.12 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance testantworten NS0-163 NS0-163 exam fragen NS0-163 antworten NS0-163 testantworten
NO.13 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance testantworten NS0-163 zertifizierungsantworten NS0-163 prüfungsunterlagen NS0-163 NS0-163
NO.14 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance zertifizierungsfragen NS0-163 prüfung NS0-163 zertifizierung NS0-163
NO.15 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance NS0-163 exam fragen NS0-163 NS0-163 testantworten
NO.16 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance NS0-163 zertifizierung NS0-163 echte fragen
NO.17 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance echte fragen NS0-163 NS0-163 prüfung
NO.18 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance prüfung NS0-163 antworten NS0-163 exam fragen NS0-163
NO.19 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance NS0-163 NS0-163 dumps NS0-163 NS0-163 prüfungsfrage
NO.20 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
Network Appliance NS0-163 echte fragen NS0-163 NS0-163 NS0-163 prüfungsunterlagen
Die Network Appliance NS0-163 Zertifizierungsprüfung gehört zu den beliebten IT-Zertifizierungen. Viele ambitionierte IT-Fachleute wollen auch diese Prüfung bestehen. Viele Kandidaten sollen genügende Vorbereitungen treffen, um eine hohe Note zu bekommen und sich den Bedürfnissen des Marktes anzupassen.
没有评论:
发表评论