Das Expertenteam von Pass4Test nutzt ihre Erfahrungen und Kenntnisse aus, um die Schulungsunterlagen zur EMC E20-520 Zertifizierungsprüfung zu bearbeiten. Unsere Schulungsunterlagen zur EMC E20-520 Zertifizierungsprüfung sind bei den Kunden sehr beliebt. Das sind die Ergebnisse der fleißigen Experten-Teams. Diese Simulationsfragen und Antworten sind von guter Qualität. Und die Ähnlichkeit beträgt über 95%. Sie sind eher zuverlässig. Wenn Sie die Trainingsinstrumente von Pass4Test benutzen, können Sie 100% die EMC E20-520 Zertifizierungsprüfung bestehen.
Fühlen Sie sich schmerzvoll, wenn Sie so viele IT-Zertifizierungen und Zertifizierungsunterlagen sehen? Was sollen Sie machen? Welche Prüfung und welche Prüfungsunterlage sollen Sie wählen? Wir Pass4Test können die geeignete Prüfungen für Sie wählen, wenn Sie wissen nicht, wie sich zu entscheiden. Sie können jetzt sehr populäre EMC E20-520 Zertifizierungsprüfung wählen. Diese Zertifizierung hat viele Vorteile. Außerdem, wenn Sie sehr effektiv die Prüfung vorbereiten, können Sie sich für EMC E20-520 dumps von Pass4Test entscheiden. Es ist die beste Methode für dich, diese Prüfung einfach zu bestehen.
Exam Code: E20-520
Prüfungsname: Calriion solutions specialist exam
Aktulisiert: 2014-02-16
Nummer: 520 Q&As
Heutztage hat ein Fachqualifizieter große Vorteile in der heute konkurrenzfähigen Gesellschaft, besonders im IT-Bereich. Einige IT-Zertifikate zu bekommen ist sehr nützlich. Die EMC E20-520 Zertifizierungsprüfung ist eine Prüfung, die das Niveau der fachlichen Kenntnissen überprüft und stellt ein großes Gewicht in der IT-Branche dar. Wegen der Schwierigkeit der EMC E20-520 Zertifizierungsprüfung hat man viel Zeit und Energie für die Prüfung benutzt. Jedoch sind sie am Ende doch in der Prüfung durchgefallen. Die Gründe dafür liegt darin, dass Sie nicht an der speziellen Kursen teilnehmen. Nun haben Experten die zielgerichteten Prüfungen entwickelt, die Ihnen helden, viel Zeit und Energie zu ersparen und zwar die Prüfung 100% zu bestehen.
Die EMC E20-520 Prüfungsfragen von Pass4Test sind in Übereinstimmung mit dem neuesten Lehrplan und der echten EMC E20-520 Zertifizierungsprüfung. Wir aktualisieren auch ständig unsere Schulungsunterlagen. Alle Produkte erhalten Sie mit einjährigen kostenlosen Updates. Sie können auch das Abozeit verlängern, so dass Sie mehr Zeit bekommen, um sich umfassend auf die Prüfung vorzubereiten. Wenn Sie verwirrt sind oder nicht dafür entscheiden können, ob Sie die Schulungsunterlagen von Pass4Test kaufen oder nicht. Dann können Sie teilweise die Prüfungsfragen und Antworten umsonst in der Pass4Test website als Probe herunterladen. Wenn es Ihnen passt, dann gehen Sie zum Kaufen ohne Bereuung.
E20-520 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/E20-520.html
NO.1 A storage administrator wants to use a point-in-time copy of a production LUN for testing and possibly
keep any changed data from that copy. The administrator's goal is to minimize the performance impact on
the production LUN as well as use the point-in-time copy for restoring their data.What is the extent size for
this LUN?
A.Use a clone and promote it as needed
B.Use a clone and reverse-synchronize as needed
C.Use a snapshot of a clone and roll back as needed
D.Use a snapshot and deactivate command to make changes permanent on the production LUN
Answer:B
EMC E20-520 zertifizierungsfragen E20-520 E20-520
NO.2 What is the process for flagging source LUNs?
A.Snapshots are created, changing the LUN's state.
B.Via GUI interface or CLI the state change bit is switched.
C.The PSM LUN is set to "source."
D.Via Navisphere Analyzer the FLARE LUN is changed to a PSM LUN.
Answer:A
EMC E20-520 E20-520 prüfungsfrage
NO.3 Which object would maintain the changes to a source LUN in the event a MirrorView/S configuration
suffered a link outage followed by an SP trespass?
A.Metavolume
B.Fracture log
C.Write intent log
D.Clone private LUN
Answer:C
EMC exam fragen E20-520 E20-520 originale fragen E20-520 prüfungsunterlagen E20-520 originale fragen
NO.4 What does the fracture log allow?
A.Incremental resynchronization of data
B.Creation of markers for each modified track
C.Capture of persistency errors from the source to target
D.Connectivity failures from both directions
Answer:A
EMC E20-520 E20-520 E20-520 echte fragen
NO.5 A storage administrator tries to create a clone group on a CLARiiON CX4 and receives an error
message that stops the clone group from being created.What could be a possible cause?
A.MirrorView has not been configured.
B.Population latency has not been configured.
C.No CPLs have been allocated.
D.No reserved LUNs have been allocated.
Answer:C
EMC exam fragen E20-520 E20-520
NO.6 The primary image of a MirrorView/S mirror set has trespassed from SPA to SPB on the primary
array.Which SP now owns the secondary image?
A.ALUA determines ownership
B.SPA on the secondary array
C.Neither SPA or SPB
D.SPB on the secondary array
Answer:D
EMC E20-520 prüfung E20-520 zertifizierungsfragen E20-520 zertifizierung
NO.7 A customer intends to use clones in their environment. They are concerned about the usability of clone
data.They ask about the result of removing a clone from a clone group.Which statement describes the
result of that operation?
A.Clone LUN may be used for reverse-synchronization operations.
B.Clone LUN may be used for synchronization operations.
C.Data on the clone LUN is flagged in the clone private LUN.
D.Data on the clone LUN is not affected and may be used by a host.
Answer:D
EMC prüfungsunterlagen E20-520 prüfung E20-520 E20-520 prüfungsfrage
NO.8 What CLARiiON is needed to meet a customer's requirement for their MirrorView/S environment that
will have 50 consistency groups?
A.CX4, FLARE 22
B.CX4, FLARE 28
C.CX3, FLARE 26
D.CX3, FLARE 28
Answer:B
EMC E20-520 E20-520 testantworten
NO.9 Which device is enabled by default when creating a mirror set in a MirrorView/S environment on a
CX4-120 with FLARE 28?
A.Write intent log
B.Reserved LUN pool
C.Secondary Image
D.Clone private LUN
Answer:B
EMC antworten E20-520 prüfungsfrage E20-520 E20-520 zertifizierungsantworten
NO.10 What happens when a snapshot is deactivated?
A.The snapshot becomes inaccessible to the primary host.
B.The SnapView session ends.
C.The snapshot becomes inaccessible to the secondary host.
D.All metadata is removed from the SP.
Answer:C
EMC E20-520 prüfungsunterlagen E20-520 E20-520 prüfungsfragen E20-520 zertifizierung
NO.11 The number and size of SnapView pointers have reached memory allocation. What will take place to
adjust to this situation?
A.Pointers will be paged to the reserved LUN as required.
B.128 KB memory chunks will be added until the memory usage has been satisfied.
C.Pointers will be paged to and from the reserved LUN as required in 512 KB chunks.
D.An additional reserve LUN will be required.
Answer:C
EMC prüfungsunterlagen E20-520 E20-520 originale fragen E20-520 prüfung E20-520
NO.12 Which statement describes the operation of the reserved LUN pool?
A.LUN IDs of reserved LUNs in the reserved LUN pool can only be between 2048 and 4096.
B.All reserved LUNs must be the same size, on FC disks, and have the same RAID type.
C.Separate reserved LUN pools are required for SnapView, Incremental SAN Copy, and MirrorView/A.
D.Reserved LUN pool is shared between SnapView, Incremental SAN Copy, and MirrorView/A.
Answer:D
EMC E20-520 originale fragen E20-520
NO.13 If a customer wants to present a secondary image LUN of a MirrorView/S mirror set to a host, what
must they do first?
A.The primary image must be removed from the mirror set.
B.The secondary image must be placed in the host storage group.
C.The secondary image must be removed from the mirror set or the secondary image promoted to a
primary image.
D.The secondary image must be fractured from the mirror set or the secondary image promoted to a
primary image.
Answer:C
EMC E20-520 prüfungsfragen E20-520
NO.14 In a MirrorView/S environment, a primary image is owned by SPA on the primary array. Which SP must
own the secondary image on the secondary array within the same mirror set?
A.Either SP on the secondary array
B.SPB on the secondary array
C.SPA on the secondary array
D.It is marked as a private LUN on the secondary array
Answer:C
EMC E20-520 dumps E20-520 E20-520 zertifizierung E20-520 antworten
NO.15 Which statement applies when the Protected Restore option is enabled on a clone?
A.Once the reverse synchronization is complete, the clone is fractured.
B.All SnapView sessions on the source LUN must be stopped.
C.A clone cannot be marked "dirty" before starting a reverse synchronization.
D.When reverse synchronization is in process, no writes are allowed to the source LUN or clone.
Answer:A
EMC E20-520 E20-520 prüfungsunterlagen E20-520
NO.16 During normal MirrorView/S operations, Navisphere Manager permits host access to how many
secondary images?
A.0
B.1
C.2
D.4
Answer:A
EMC zertifizierung E20-520 E20-520 E20-520 E20-520 E20-520 dumps
NO.17 What makes sizing of the reserved LUN pool a non-trivial task?
A.Reserved LUNs are assigned to specific source LUNs when the CLARiiON is laid out.
B.Source LUNs can be different sizes and only write to LUNs of the same size.
C.Reserved LUN pools may be different sizes and allocation to source LUNs is based on the next
available reserved LUN.
D.There are 512 reserved LUNs in all CLARiiON models while there may be many more source LUNs.
Answer:C
EMC E20-520 antworten E20-520 antworten E20-520
NO.18 A customer starts four SnapView sessions on a source LUN. The sessions are scheduled to start at
8:00 A.M., 12:00 P.M., 4:00 P.M., and 8:00 P.M. At 5:15 P.M. the reserved LUN pool runs out of
space.What will happen next?
A.Most recently allocated reserved LUN will be released.
B.Reserved LUN allocated first will be released.
C.Space used by all sessions on the source LUN will be released.
D.Space used by the session that performed the most recent write will be released.
Answer:D
EMC zertifizierung E20-520 antworten E20-520 zertifizierung E20-520 antworten
NO.19 Should a SnapView session stop automatically, what will happen to the running sessions?
A.All sessions pointing to the clone will fail over to SP B and continue to write.
B.All sessions running on the source LUN will be terminated.
C.Host buffers will be flushed and sessions restarted.
D.All memory mapping entries will be saved to the COFW log.
Answer:A
EMC zertifizierungsfragen E20-520 zertifizierungsfragen E20-520 exam fragen E20-520 E20-520 exam fragen
NO.20 Which best describes the MirrorView/A replication process?
A.A write is received, tracked in the SAN Copy delta set mechanism, transmitted to the secondary array.
B.A write is received, tracked in the fracture log, transmitted to the secondary array.
C.A write is received, tracked in the SnapView private LUN, transmitted to the secondary array.
D.A write is received, tracked in the write intent log, transmitted to the secondary array.
Answer:A
EMC originale fragen E20-520 E20-520 prüfungsfrage
Pass4Test bietet Ihnen die neusten 1Z0-061 exam Unterlagen und pdf Fragen & Antworten mit hoher Qualität. Unser 100-101 zertifizierung und 000-274 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative VCAD510 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/E20-520.html
没有评论:
发表评论