Wenn Sie ein Ziel haben, sollen Sie Ihr Ziel ganz mutig erzielen. Jeder IT-Fachmann wird mit den jetzigen einfachen Lebensverhältnissen zufrieden sein. Der Druck in allen Branchen und Gewerben ist sehr groß. In der IT-Branche ist es auch so. Wenn Sie ein Ziel haben, sollen Sie mutig Ihren Traum erfüllen. Auch in der Business-Objects RDCR08201 Zertifizierungsprüfung herrscht große Konkurrenz. Durch die Prüfung wird Ihre Berufskarriere sicher ganz anders. Eine glänzende Zukunft wartet schon auf Sie. Unser Pass4Test bietet Ihnen die genauesten und richtigsten Schulungsunterlagen und Ihnen helfen, die Zertifizierungsprüfung zu bestehen und Ihr Ziel zu erreichen.
Die Business-Objects RDCR08201 dumps von Pass4Test können Sie gewährleisten, einmal den Erfolg bei dieser Prüfung machen. Die Hit-Rate der dumps ist sehr hoch, deshalb Sie nur bei den Unterlagen diese Prüfung bestehen. Sie können auch zuerst die Prüfungsmusters probieren. Pass4Test können Ihnen Geld zurückgeben, wenn Sie durchgefallen sind, deshalb haben Sie keinen Verlust. Nach der Nutzung können Sie die Qualität der Business-Objects RDCR08201 dumps kennen lernen. Probieren Sie bitte. Das Muster beinhaltet einige Prüfungsfragen und Sie können an Pass4Test das Muster herunterladen.
Wir sollen im Leben nicht immer etwas von anderen fordern, wir sollen hingegen so denken, was ich für andere tun kann. In der Arbeit können Sie große Gewinne für den Boss bringen, legt der Boss natürlich großen Wert auf Ihre Position sowie Gehalt. Wenn wir ein kleiner Angestellte sind, werden wir sicher eines Tages ausrangiert. Wir sollen uns bemühen, die Zertifizierung zu bekommen und Schritt für Schritt nach oben gehen. Die Fragen und Antworten zur Business-Objects RDCR08201-Prüfung von Pass4Test helfen Ihnen, den Erfolg durch eine Abkürzung zu erlangen. Viele IT-Fachleute haben die Schulungsunterlagen zur Business-Objects RDCR08201-Prüfung von Pass4Test gewählt.
Die Fragen zur Business-Objects RDCR08201-Prüfung von Pass4Test enthalten unbeschränkte Antwortenspeicherungen. So können Sie ganz einfach die Prüfung bestehen. Die Schulungsunterlagen zur Business-Objects RDCR08201-Prüfung von Pass4Test sind die besten. Mit deren Hilfe, können Sie ganz einfach die Prüfung bestehen und das Zertifikat für Business-Objects RDCR08201-Prüfung erhalten.
Sind Sie mit Ihrer Arbeit zufrieden? Sind sie damit Zufrieden, was Sie jetzt machen? Wollen Sie Ihre Arbeitsfähigkeit erhöhen? Dann müssen Sie zuerst mehr nützliche Fähigkeiten für Ihre Arbeit beherrschen, indem Sie sich besser erhöhen. Und das wichtigste ist, dass Arbietsgeber wissen, Sie mehr Arbeitsfähigkeiten beherrschen. Dann nehmen Sie an Business-Objects RDCR08201 Prüfung teil. Diese Prüfung kann Sie Ihren Wunsch erreichen. Und es macht nichts, wenn Sie die Prüfungsfragen nicht genug kennen, weil Sie die Hilfe und die Vorbereitungswerkzeuge an Pass4Test finden können. Die Prüfungsfragen und-antworten können Ihnen helfen, Business-Objects RDCR08201 Zertifizierung zu bekommen.
Wollen Sie Business-Objects RDCR08201 Zeritifizierungsprüfung ablegen? Wollen Sie die Business-Objects RDCR08201 Zertifizierung bekommen? Wie können Sie ohne sehr gute Vorbereitung diese Prüfung ablegen? Tatsächlich gibt es eine Weise für Sie, in sehr beschränkter Zeit diese Prüfung leicht zu bestehen. Was können Sie machen? Es ist erreichbar, dass Sie die Business-Objects RDCR08201 dumps von Pass4Test benutzen.
Exam Code: RDCR08201
Prüfungsname: Business Objects Certified Professional - Crystal Reports 2008 - Level One
Aktulisiert: 2014-01-22
Nummer: 170 Q&As
RDCR08201 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/RDCR08201.html
NO.1 In Crystal Reports you select multiple report objects at the same time. Which two menu options become
available when you right-click one of the selected objects? (Choose two.)
A.Move
B.Insert
C.Delete
D.Copy
E.Cut
Answer:D E
Business-Objects RDCR08201 RDCR08201 RDCR08201
NO.2 What are three Crystal Reports 2008 viewer features? (Choose three.)
A.Docked/Stationary Toolbar
B.Export to Microsoft PowerPoint
C.Java DHTML Viewer Exporting
D.Independent Group Tree Scrolling
Answer:A C D
Business-Objects RDCR08201 RDCR08201 prüfungsfrage RDCR08201
NO.3 What two configuration options are valid for long Lists of Values (LOV) in Crystal Reports 2008?
(Choose two.)
A.UI Batch Size
B.Database Timeout
C.Maximum LOV Size
D.Maximum Rowset Records
Answer:A C
Business-Objects RDCR08201 RDCR08201 testantworten RDCR08201
NO.4 Which two formulas can you use to determine whether the content of a string is a number? (Choose
two.)
A.IsNumber({Orders.Customer ID})
B.NumberText({Orders.Customer ID})
C.IsNumeric({Orders.Customer ID})
D.NumericText({Orders.Customer ID})
Answer:C D
Business-Objects originale fragen RDCR08201 prüfungsfragen RDCR08201 zertifizierung RDCR08201
NO.5 Which formula uses the correct syntax to assign a variable a value in Crystal syntax?
A.Numbervar x; x = 5;
B.Dim x as Number x = 5
C.Dim x as Number x := 5
D.Numbervar x; x := 5;
Answer:D
Business-Objects RDCR08201 RDCR08201 testantworten RDCR08201
NO.6 What is the reason you cannot insert a Group layout chart in the Page Header section?
A.You do not have access to the database.
B.The Page Header section is suppressed.
C.A Group layout chart cannot be placed in the Page Header section.
D.You have not saved the report with data.
Answer:C
Business-Objects RDCR08201 echte fragen RDCR08201 RDCR08201
NO.7 How must you register multiple XML export formats in Crystal Reports 2008?
A.Configure XML export formats using the Define XML dialog.
B.Configure XML export formats using the Manage XML dialog.
C.Add XML export formats using the Manage XML Exporting Formats dialog.
D.Add XML export formats using the Define XML Exporting Formats dialog.
Answer:C
Business-Objects prüfung RDCR08201 RDCR08201 RDCR08201 RDCR08201 zertifizierungsfragen
NO.8 You design a Crystal summary report that is grouped by Region then by Customer Name. The Details
section is hidden. The report includes a bar chart that displays total orders by Customer Name for each
Region group. Which procedure will display the chart beside the sections that show Customer Name and
Total Sales?
A.Place the chart in the Group Header #1 section and format the section to Underlay Following Sections.
B.Place the chart in the Details section and format the section to suppress if duplicated.
C.Place the chart in the Group Footer #2 section and format the section to Underlay Following Sections.
D.Place the chart in the Group Footer #2 section and format the section to suppress if duplicated.
Answer:A
Business-Objects dumps RDCR08201 prüfung RDCR08201
NO.9 Which two methods can you use to change the appearance of an object that you add to a Crystal report?
(Choose two.)
A.Hold down CTRL + Spacebar and click on the object.
B.Right-click the object and use the Format Editor.
C.Select the object and use the Formatting toolbar.
D.Drag-and-drop the object to the Formatting toolbar.
Answer:B C
Business-Objects dumps RDCR08201 RDCR08201
NO.10 When should you use parameters?
A.When creating conditional Top N reports.
B.When identifying the data source location.
C.When identifying trends in data.
D.When creating dynamic groups.
Answer:D
Business-Objects RDCR08201 RDCR08201 prüfungsfrage
NO.11 Which three lines of code will generate an error? (Choose three.)
A.Local Number x := 1;
B.Local NumberVal x := 1;
C.Local NumberVar x := 1;
D.Local NumberValue x := 1;
Answer:A B D
Business-Objects prüfungsfrage RDCR08201 RDCR08201
NO.12 You create a new Crystal report and want to add a Top N sort, but the Group Sort Expert is inactive.
How can you activate the Group Sort Expert?
A.Insert a group name field.
B.Insert a summary field.
C.Insert a running total field.
D.Insert a formula field.
Answer:B
Business-Objects RDCR08201 antworten RDCR08201 RDCR08201
NO.13 You are creating a Crystal report to show just the Top N countries in an international sales report based
on total sales for the previous quarter. The value of N is dynamic. Which method must you use to achieve
the required result?
A.Using the Group Select Expert, create a parameter to set the value of N. Add a conditional formula to
view just the Top N countries.
B.After creating a parameter to set the value of N, reference that parameter within the Group Sort Expert.
Refresh the report setting the value of N in the parameter to show just the Top N countries.
C.Using the Group Sort Expert, create a parameter to set the value of N. Refresh the report setting the
value of N in the parameter to show just the Top N countries.
D.After creating a parameter to set the value of N, refresh the report to view just those countries with a
grand total that is greater than N.
Answer:B
Business-Objects RDCR08201 dumps RDCR08201 RDCR08201 dumps RDCR08201
NO.14 Which two reasons explain why the Group Sort Expert is disabled when you attempt to create a Top N
report? (Choose two.)
A.You are in Design view.
B.The data was not refreshed.
C.You are in a Drill Down view.
D.The report is missing a summary value.
Answer:C D
Business-Objects RDCR08201 zertifizierungsantworten RDCR08201 exam fragen RDCR08201 RDCR08201 prüfungsfrage
NO.15 You need a report that shows all customers and allows the report reader to view either a report listing all
days in the month to date or to view only the customers with daily sales greater than $5000. You decide to
use report alerts to accomplish this. Which formula properly sets the alert condition?
A.Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000
B.Sum ({Orders.Order Date}, {Orders.Order Amount}, "daily") > 5000}
C.IF Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000 THEN crCondition = "Enabled"
D.IF Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000 THEN AlertMessage = "Enabled"
Answer:A
Business-Objects prüfungsunterlagen RDCR08201 RDCR08201 RDCR08201
NO.16 You have created a report with a parameter but the parameter value is not always required. Which
method should you use?
A.Set Editable to True
B.Set Null Values to True
C.Set Custom Values to True
D.Set Optional Prompt to True
Answer:D
Business-Objects testantworten RDCR08201 RDCR08201 exam fragen
NO.17 You are designing a Crystal report that summarizes customer orders by country, then by state, then by
city and by customer ID. You want the report to print each country on a new page. The first page should
display a bar chart showing Total Sales by Country group in the Report Header and as much of the first
country as can be displayed. The last page should show the summary for the last country and the grand
total for the entire report. Which step can you perform in the Section Expert to achieve the design goal?
A.Set New Page After on for Group Footer #1
B.Conditionally format the New Page After property for Group Footer #1 using the formula "not
onlastrecord"
C.Format the New Page After property for Group Header #1 using the formula "not onlastrecord"
D.Set New Page After on for the Report Header section
Answer:B
Business-Objects RDCR08201 RDCR08201 zertifizierungsantworten RDCR08201 prüfungsfrage RDCR08201 originale fragen
NO.18 Which method can you use to insert field objects into a Crystal report?
A.Select the Field option from the Insert menu.
B.Right-click the area where you want the field object to appear, then select Insert Field Object from the
Context menu.
C.Click the field name, drag it to the desired position and release the mouse button to insert.
D.Click the Field button on the Formatting toolbar.
Answer:C
Business-Objects RDCR08201 RDCR08201 RDCR08201 prüfung RDCR08201
NO.19 You copy a report from BusinessObjects Enterprise and modify the report. Which two methods can you
use to save changes back to BusinessObjects Enterprise? (Choose two.)
A.Save the report using the Report Explorer.
B.From the Main menu, select Save and choose Enterprise.
C.From the Main menu, select Save and choose Web Folders.
D.Save the report using the Repository Explorer.
Answer:B D
Business-Objects RDCR08201 RDCR08201 RDCR08201 prüfungsunterlagen RDCR08201
NO.20 Which two methods can you use to insert field objects into a Crystal report? (Choose two.)
A.Right-click the area where you want the field object to appear, then select Insert Field Object from the
Context menu.
B.Click the field name, drag it to the desired position and release the mouse button to insert.
C.Open the Section Expert and click the Insert button.
D.Click the field name and click the Insert to Report icon at the top of the Field Explorer. Drag the field to
the desired position and left-click to insert.
Answer:B D
Business-Objects zertifizierung RDCR08201 RDCR08201 echte fragen
NO.21 You want to use the Workbench feature to manage multiple reports and publish them to
BusinessObjects Enterprise as object packages. Your manager is concerned that any Crystal user could
access and make changes to the reports located on the Workbench. How can you address your
manager's concerns?
A.Encrypt object packages.
B.Password protect object packages.
C.Assign appropriate permissions to object packages that are published to BusinessObjects Enterprise.
D.Track changes on object packages using the Dependency Checker.
Answer:C
Business-Objects RDCR08201 RDCR08201 echte fragen RDCR08201 RDCR08201
NO.22 You must create a static array in a Crystal report to be used for numeric calculations in other formulas.
How can you do this?
A.Global NumberVar Array newArray := Array (1, 2, 3, 4, 5);
B.Global NumberVar Array newArray := MakeArray (1, 2, 3, 4, 5);
C.Global NumberVar Array newArray := CreateArray (1, 2, 3, 4, 5);
D.Global NumberVar Array newArray := DefineArray (1, 2, 3, 4, 5);
Answer:B
Business-Objects exam fragen RDCR08201 prüfungsunterlagen RDCR08201 RDCR08201
NO.23 Which three options are provided for web pagination? (Choose three.)
A.Navigation controls
B.Page breaking controls
C.Conditional Page Margin controls
D.Portrait versus Landscape controls
Answer:B C D
Business-Objects RDCR08201 RDCR08201 echte fragen RDCR08201
NO.24 You want to create a formula using the Formula Workshop. You begin by right-clicking Formula Fields
in the Field Explorer and then click the New button. What happens after you click the New button?
A.You must select the type of formula and click OK.
B.The Formula Workshop opens with the Formula Editor inactive.
C.You must enter a formula name and click OK.
D.The Formula Workshop opens with the Formula Editor active.
Answer:C
Business-Objects echte fragen RDCR08201 antworten RDCR08201
NO.25 After you select a BusinessObjects Universe to use as the data source for a Crystal report, you create
a query using the BusinessObjects Query Panel. What must you do to access the underlying data source?
A.Create a local cache of the data source.
B.Create a connection to the data source.
C.Create a local ODBC resource for the data source.
D.Log in to BusinessObjects Enterprise.
Answer:D
Business-Objects prüfung RDCR08201 originale fragen RDCR08201
NO.26 Which three If-Then-Else control structure formulas in Crystal syntax will generate an error? (Choose
three.)
A.If {Orders.Order Amount} < 100 Then "Under $100" Else Is {Orders.Order Amount} in 100 to 200 Then
"Between $100 and $200"
B.If {Orders.order Amount} < 1000 Then "Low" Else "High"
C.If {Orders.Order Amount} < 100 Then formula = "Under $100" ElseIf {Orders.Order Amount} in 100 to
200 Then formula = "Between $100 and $200" EndIf
D.If {Orders.Order Amount} < 200 Then Under $200 Else If {Orders.Order Amount} in 200 to 300 Then
Between $200 and $300
Answer:A C D
Business-Objects RDCR08201 prüfungsfragen RDCR08201 prüfungsfragen
NO.27 You make changes to the record selection criteria in a Crystal report. In which two circumstances
should you choose the Refresh Data option rather than the Use Saved Data option? (Choose two.)
A.When up-to-the-minute, current information must be displayed on the report.
B.When adding one or more selection criteria.
C.When it is important to avoid time delays caused by network traffic during database server connects.
D.When removing one or more existing selection criteria.
Answer:A D
Business-Objects antworten RDCR08201 RDCR08201 prüfungsfrage
NO.28 You want to see a list of formulas containing references to a specific field. Which method can you use?
A.Browse Field
B.Repository Explorer
C.Formula Field Search
D.Global Formula Search
Answer:D
Business-Objects exam fragen RDCR08201 RDCR08201 originale fragen RDCR08201
NO.29 Which two statements describe how optional prompts behave in Crystal Reports 2008? (Choose two.)
A.If no value is entered in the prompt, all values are returned.
B.If no value is entered in the prompt, no values are returned.
C.If the parent prompt is optional, the child prompt must be optional.
D.If the child prompt is optional, the parent prompt must be optional.
Answer:A C
Business-Objects zertifizierungsfragen RDCR08201 RDCR08201 RDCR08201
NO.30 Which special field can you use to display the date a report was last changed?
A.Modification Date
B.Modification LastDate
C.Modification LastUpdate
D.Modification Time
Answer:A
Business-Objects prüfungsfragen RDCR08201 echte fragen RDCR08201 zertifizierungsantworten RDCR08201
Pass4Test bietet Ihnen die neusten ST0-237 exam Unterlagen und 70-321 pdf Fragen & Antworten mit hoher Qualität. Unser 70-561 zertifizierung und 1z0-559 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 000-614 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/RDCR08201.html
没有评论:
发表评论